Weights only 7 oz!
The Pro 1250 LED video light has 160 ultra bright LEDs that are 20% to 30% brighter than other models with 160 LEDs. Our Pro 1250 led video light has an effective light throw of up to 35ft. Plus, is dimmable so you can adjust the amount of light you need. The Pro 1250 works with all Video Cameras and DSLR Cameras.
The LED Video Light base comes with a standard Tilt & Swivel Shoe Mount that has a 1/4-20 screw thread on the end that mounts
into the LED Video Light and a hot shoe or accessory shoe mount for mounting on your camera. By using a Tilt & Swivel Shoe Mount,
you will have a full range of motion so the LED video light can be positioned in any direction you need.
It also have a built-in battery meter as shown below:
The Pro 1250 LED Video Lights Includes:
1 - Pro 1250 LED Video Light
1 - White Diffuser
1 - 3200K Diffuser
1 - CTO Diffuser for shooting under Fluorescent lights
1 - Tilt and Swivel Shoe Mount
Items included are shown in a picture below.
The Pro 1250 LED Video Lights can use any of the following types of batteries:
If you use rechargeable AA batteries, we recommend using Nickel Metal Hydride Batteries (NiMH).
These batteries come with different capacities. When buying NiMH batteries, it is best to by the ones with the
highest mAh rating. For example, you may find NiMH batteries that are rated at 2000mAh and other at 2500mAh. Buy the 2500mAh batteries
as they will last 20% longer. Remember, the higher the mAh rating, the longer they will last.
The Pro 1250 LED Video Light will run for approx. 2 1/4 hours on a set of 2500mAh NiMH batteries.
Battery Running Time with the Sony Type Batteries we sell.
This will vary on the size of the battery and the brightness level you are using.
The approximate running time of the batteries we sell are:
2 to 2.5 hours with the NP-F550 style battery
4 to 4.5 hours with the NP-F750 style battery
6 hours+ with the NP-F950 style battery
Very Light Weight
The Pro 1250 LED video light is extremely light weight. It only weights 7 oz. without batteries.
The PRO 1250 LED video light has a color temperature of 5400k and it comes with a 3200k diffuser, a CTO diffuser for shooting under Fluorescent lights and a white diffuser to help remove any harsh lighting effects when you are close up.
Don't forget to always white balance your video camera when using any LED video light.
Each LED Video Light has been Tested at
Studio 1 Productions Prior to
Shipping to the Customer.
The Pro 1250 LED Video Light has 160 ultra bright LED's with an output of 1250+ Lux at 1 meter and is fully dimmable. Note: we have measured the output of these LED video lights and they come in at 1290 Lux.
We do offer an optional battery and charger for the Pro 1250 LED Video Light.
Scroll down the page for information and ordering options.
If you are using Panasonic Batteries:
If you are going to be using a Panasonic CGR-D series battery, you do NOT need a battery adapter plate. On this model of LED video light, the Panasonic battery contacts are built-in the back of the video light.
The Pro 1250 LED Video Light Below has several options for battery power. Below is a complete list of batteries that will work with the Pro 1250 LED Video Light.
The LED 1250 Video Light can also runs on 5 AA Batteries
Optional Accessories for the LCD Monitor
It is a great replacement battery charger.
LED Video Lights for Camcorders
LED Video Lights for DSLR Cameras
LED Video Lights for Video Cameras
20 Day Return Policy.
1 Year USA Warranty through Studio 1 Productions