Works with newer models of Sony Camcorders
and Sony Cameras.
The JJC SR-F2 is a direct replacement for the Sony RM-VPR1. However, it gives you a couple of extra features, such as
Record and Power on LED, plus you can display a grid line on the LCD screen with the JJC SR-F2.
The JJC SR-F2 Remote Control comes with Multi-terminal Cable that is approximately 3 feet long . (Note: If you need longer cables we have them, just click on this link. They are also listed on this page.)
The JJC SR-F2 remote, is a wired remote that is powered from the camcorder or camera. It allows you various remote control operations to be performed without handling the camera, therefore eliminating camera shake.
The JJC SR-F2 is perfect for EndZone camera setups since it has a LED light that will show you when you are recording and if the camera is powered on.
The JJC SR-F2 offers the following controls and features:
Stop/Start the video recording
Zoom In and Out - Two Speeds are available
Power the camera on/off
Shutter Release and Shutter open (bulb)
Grid Line for the LCD screen On/Off
An LED Light that shows if the camera is powered on and if you are recording or not
A 1/4-20 screw mounting hole on the real of the remote. See the picture farther down this page.
The photo above show the controls on the JJC SR-F2 Remote
Shoot smooth videos
Using the JJC SR-F2 remote, you can Start and Stop the video recording or control zoom from the Sony RM-VPR1 remote without accidentally shaking the camera or camcorder when you try to use the camcorder or camera's on board controls.
Get better macro photographs
You can have steady, vibration-free shutter release camera for really still for close-up photography.
The shutter lock or bulb function lets you keep the camera shutter open without vibration for long exposures.
Great for use with Jib Arms, Pole Camera systems and End Zone Camera Systems
The JJC SR-F2 remote control with the optional extension/replacement cable is perfect for those situations when your camera is far from the remote. We offer a 27 ft extension cable for the JJC SR-F2 remote.
Made for Multi Terminal cameras or camcorders
The remote works with AX, NEX, SLT and Cyber-shot™ cameras and Handycam® camcorders with a Multi Terminal connection.
We have Extension Cables for the JJC SR-F2 remote controller, as shown above.
The Extension/Replacement cable will replace the short cable that comes with the JJC SR-F2 remote. We offer a 27 ft. cable for this remote.
The Extension or Replacement cables can be ordered on this page. This page also includes instructions on how to use the cable with this remote and how to setup a Sony Camcorder to display the Record and Battery information on an HDMI monitor.
We also have 25 ft and 15 ft HDMI cables for the Sony camcorders.
Here is the link to the HDMI cable page.
Here is a list of video cameras that work with the JJC SR-F2 remote.
For other Sony Cameras, such as the AX, NEX, SLT and Cyber-shot cameras, we have compiled a list of cameras that will work with the JJC SR-F2 remote. You can find that list by clicking here.
20 Day Return Policy.
90 Day Warranty.