Studio 1 Productions
Since 1993
Click to Verify Trust Seal
Secure Shopping 

Keep up to date via
Studio 1 Productions RSS Feed
Or
Email Newsletter

How to Assemble the VSB1 Video Camera Shoulder Brace.

While most people won't need the instructions, we have provided
them online in case you should want to print them out for reference.

Step 1
Attach the U-Bracket to the Shoulder Bar.
The U-Bracket mounts
Under the Shoulder Bar, as shown below.
Use the two Black thumb screws to hold the U-Bracket in place, as shown below.

VSB1 Video Shoulder Brace

 

Step 2
Attach the Accessory Box to the Shoulder brace.
The Shoulder Bar goes on the
Outside of the Accessory Box, as shown below.
You can use either set of mounting holes, as seen below.
Finger tighten the provided Nylon Thumb Screws.

Video Shoulder Brace

 

Mounting the Optional Additional Accessory Box.
All accessory boxes have a second set of mounting holes on the opposite
side of the box from where it mounts to the shoulder bar. This additional
set of holes are there so you can attach a 2nd accessory box, as shown below.

The optional additional accessory box comes with the nylon thumb screws and a
set of washers. The washers are placed between the two boxes, as shown below.

Video Shoulder Brace

 

Home   |  Privacy Policy   |  Contact Us   |  FAQ
Studio 1 Productions Studio 1 Productions
 Video BackgroundsPayPal
Web Address:
http://www.studio1productions.com
Questions 386-788-6075     M-F 10am to 5pm EST.
Prices and Availability are subject to change without notice.  We are not responsible for typographical errors.  Return Policy, Click Here  All photos or products mentioned are copyrighted / registered trademarks of their respective companies.   Studio 1 and Studio 1 Productions are trademarks of Studio 1 Productions Inc.
Other trademarks of Studio 1 Productions Inc.  This page is Copyright © 2010 Studio 1 Productions Inc.   All rights reserved
.