|
| |
Looking for Broadcast-level performance
on an Industrial-level budget?
Call RealTime Video Engineering at
(760)945-3321
|
Introducing RealTime Video Engineering's
PRO-FIFTY Upgrade
for the Panasonic WJ-MX50 |
Upgrade is
Available Only From
RealTime
Video Engineering
(760)945-3321 • (760)945-3369 fax
Please do not
contact Studio 1, call RealTime Video Engineering direct.
The Pro-Fifty WJ-MX50 outperforms switchers
at FIVE TIMES the cost !
|
Now Available: Used
MX-50 Mixers - Call RealTime Video Engineering at (760)-945-3321 |
|
F ULL
NTSC BANDWIDTH
The Pro-Fifty Pro-Use Upgrade revises the MX- 50’s
factory 350-line
( 4.5
MHz) resolution to 500 lines (6.3
Mhz), resulting in a noticeably sharper
image. Your MX50
is now a viable special effects
generator for use with digital video formats such as
Mini-DV,
DVCAM
and
DVCPRO. |
F ULL
FCC BROADCAST
COMPLIANCE
The Pro Fifty refines the MX- 50’s
circuitry to meet all FCC requirements for direct-to-air use.
New "Black Clipper" circuitry provides clean, consistent
7.5IRE black under all
conditions, while the new Crystallocked subcarrier generator greatly
improves color rendition. |
 |
H IGH-PERFORMANCE
TUNING
Your entire MX- 50
digital video mixer is meticulously fine-tuned for optimum
performance, resulting in a visually transparent signal path.
All routine maintenance is performed and detail of final
specifications is provided. No stone is unturned !
|
|
Z ERO-LOSS
DUAL
PROC
AMP
CONTROLS
New Contrast,
Black Level Level, Color Intensity
and
Hue
controls for each bus.
Easy-to-use independent controls allow you to compensate for poor lighting
conditions, properly correct skin tones, solve white balance problems,
fine-tune chroma keys, reduce generation loss, and precisely match your
sources... without the signal degradation of add-on processors. |
THE BEST
WARRANTY
IN THE INDUSTRY
!
The Pro-Fifty Upgrade is built to the highest standards of
workmanship and is covered by a full
5 year
warranty on both parts and labor.
|
Upgrade is
Available Only From
RealTime
Video Engineering
993-C South Santa Fe Road,
Suite 233 Vista, CA 92083
(760)945-3321 • (760)945-3369 fax
Studio 1 Productions
Does Not Perform
the upgrades, please contact RealTime
Video Engineering.
Thanks |
|
|
"Rated as Stated"
"Our tests of the Pro-Fifty verified all claims of
improvement. The Upgrade met or exceeded all rated specifications for
extended bandwidth, IRE levels, and other calibration standards. The DVC
Color correction worked flawlessly..."
"Before you run out and spend thousands of dollars on a new
high-end digital mixer, it would definitely be worth looking into the
Pro-Fifty modification for your WJ-MX50."
Steven Bolander, Senior Technical Editor, WEVA International magazine
"From one single business owner to another, I really
appreciated your honest and no bull description of your modification…The
quality and advertised results are exactly as you said they would be and
then some." Cliff
Nichols, Video Dimensions, Tega Cay, SC
"…Much improved signal-to-noise and higher resolution. Very
transparent signal pass-through!" "The audio mod along with the removal of
terminators has greatly improved my live switch shows!" "Thanks so much for
your personal attention to detail and for the additional customized mods you
did for me."
Tom Jensen, Jensen Video, San Diego, CA |
"…Broadcast standard restored. Purer blacks. Individual
control of Proc Amps for A&B buses." "Every now and then you come
across a company which not only meets accepted standards, but exceeds them.
I liked being treated as an important client instead of a number or $.
Follow-up was professional & friendly. Bob Rall is a class act."
John Williams, Studios at
SWAU, Keene, TX
"I liked the impeccable quality of craftsmanship in all
aspects of the work performed. The additional knobs and labels look like a
factory retrofit. It's nice to know in this age of advertising
misinformation, that Bob did everything to the mixer that he promised, lined
up all the electronic specs to perfection and continues to service the
industry with helpful tips and creative methods of imitating more expensive
systems."
"Having the (proc amp controls) tie in to the internal
circuitry has removed a source of signal degradation from my edit system
while keeping extra wires & black boxes from cluttering my edit bay."
Eric Ortlieb, Steadytracker Corporation, Aliso Viejo, CA
|
Also, used MX-50 Video Mixers are Available from
RealTime Video Engineering
(760)945-3321
Having RealTime Video Engineering upgrade your MX-50:
1. Call Bob Rall at
(760)945-3321 to schedule an appointment (Do Not Call
Studio 1) if you desire expedited handling. A anticipated
return date will be given, based upon the delivery date. Generally we need
two full days bench time for an MX-50, so allow for 3 three days at our end.
We’re very flexible and will do our best to work around your busy schedule.
Please call if for some reason you are unable to keep your appointment.
2. Before you pull the
Panasonic WJ-MX50 from your system, you might want to label your cables and connections
to make it easy to install your "new" MX-50.
3. Package the MX-50 for
shipment. Shipping the unit in the original packing is easiest and most cost
effective for air shipments. Be sure to place the unit in the
factory-supplied plastic bag. If you do not have the original packing,
first place the mixer in a plastic trash can liner, then wrap it with at least
two inches of bubble wrap. Place the bubble-wrapped unit in a suitable box
(the original is 20" x 23" x 10") and fill the rest of the box tightly with foam "peanuts" or other
lightweight packing material. Avoid "oversize" packaging for shipments via air services. Most carriers
charge a "dimensional weight" based
upon box size. Actual weight of the MX-50 in the original packing is 20
lbs. Dimensional weight in the original packing is 24lbs (FedEx) and 25
lbs (UPS). Larger boxes can cost much more to ship. If you wish to
save some money by shipping via ground
services, you can use a much larger box. Keep in mind, though, that as
the size approaches 8 cu ft, shipping jumps to a flat 70lbs basis.
A packing and shipping service (such as Mailboxes, Etc.) can do
this job for you. Most charge about 15-20% markup on the shipping plus
about $5 for the box. If shipping by
air services, have them trim the box to a size close to the original to
minimize dimensional weight charges. Some customers have the unit packaged
by a shipping service then ship it themselves rather than paying the shipping
service markup. Unlike your tape decks, the MX-50’s internals are not
especially fragile. Any reasonable packaging which will just more than
protect the external cosmetics of the unit will allow it to be shipped safely.
(When packaging the MX-50, however, avoid setting it upside down on other than a padded surface,
as the fragile Color Correction CHROMA and Matte Generator LEVEL controls are
vulnerable to breakage. In general, be careful with these or any of the
other similar potentiometers on the MX-50’s top panel.)
We’ve been modifying mixers since 1992 and have never had a
problem in shipping with any reasonably packaged unit. Still, you may want
to insure your mixer. Insurance generally runs about $.50 per $100 value.
We will be responsible for your mixer from the time we sign for it until it is
returned to your address. An adult signature will be required.
3. Enclose payment by
cashiers check, money order or company check payable to "RealTime Video
Engineering". Payment may accompany the unit or be received under separate
cover prior to its return unless other prior arrangements have been made.
4. Be sure to include your
return shipping address and phone number. Jot a quick note if
anything is working other than it was when the mixer was new, or if there is
anything else which we should be aware of.
5. Ship your MX-50 to us
using a copy of the shipping label on the back of this sheet. RealTime
Video Engineering will pay for return shipping.
6. Please feel free to
call Bob Rall at (760)945-3321, 7 days a week (8-8 PST) if you wish to check
the status of your mixer. I’ll call you if I have any questions.
7. In just a few days
you’ll be enjoying a precision tuned instrument which will make a MAJOR
improvement in the quality of your finished productions !
http://www.studio1productions.com
|
