|
The AM-300 Headphone Amplifier was designed to be used by the person who is holding a boom microphone so they can monitor the audio that they are capturing. (You can use the AM-300 to
monitor other microphones, you are not limited to using it with a boom mic.)
The AM-300 Headphone Amp is designed to clip on your belt, keeping your hands free to hold the mic boom pole.
The headphone amp features adjustable headphone volume, both a 1/8" and a 1/4" headphone jack, along with a power LED and a Power On/Off switch.
The XLR audio is passed through the AM-300 without amplification or distortion. Only the audio going to the headphone jack is amplified.
Ideal for the professional boom mic operators.
For best performance, use headphones that are 8 to 32 ohm and with a SPL
(Sound Pressure Level) of 112dB or higher. The SPL spec should be listed with the Headphones specs.
AM-300 Headphone Amplifier Features
- Balanced XLR Input
- Balanced XLR Output
- Adjustable Headphone Volume Level
- 1 Watt Headphone Output
- Power On LED
- 1/8" and 1/4" Headphone Jack
- Power On/Off Switch
- Belt Clip
- Size is only 5" x 2.5" x 1.5"
- Run off a 9 Volt Battery
Cost of Product Repairs
Headphone Amps that are out of warranty is a flat rate of $30, which includes shipping the product back to you. If the item is
within the 1 year warranty, please include a copy of the invoice.
Some of the Other Products we Offer
|
 |
 |
 |
 |
|
For best performance,
use headphones that are 8 to 32 ohm
A view of the back of the AM-300
Headphone Amplifier.
20 Day Return Policy.
1 Year Warranty!
Customer Comments
"Just finished using your Headphone on a film project that I have been working on. All I can say it WOW. Loud, clear and
lightweight. My headphones have a SPL of 116dB. I about blew my eardrums out when I cranked the headphone audio level all the way up.
Excellent product." Bill Phyzer, Chicago
"The Headphone Amp is just what I have been looking for. This thing works great! It is much
smaller and lighter than other options for monitoring a boom mic. Plus, it is less expensive!! Way to go. You have a customer for life". Joel Holk
"Cool device. The headphone amp is great for allowing my sound guy to monitor the audio being feed into the video camera.
I am a indie filmmaker and I really appreciate having high quality, low cost products for filmmakers and videographers." Terry Crockett
"I was very impressed to see it passes the audio through the Headphone Amp so cleanly. I really having the choice of 1/8" and 1/4" headphone
outputs, as I am in situations that I may need to use either headphone jacks. I did run into a problem once, where I was getting low audio
from the headphone jack. Then I remembered, to check the specs on the headphones. They only had a SPL of 102dB. Once I switched up to
a better set of headphones, the audio level for the headphones was just great. If anyone every has this problem, just remind them to check the
SPL level of the headphones." Dan Wui, Honolulu, HI
|
